Canon ip4300 manual print head alignment

 · 3. Open the Front Tray gently, and pull out the Front Tray Extension. 4. Open the printer driver setup window. 5. Adjust the print head position. (1) Click the Maintenance tab. (2) Click Print Head Alignment. (3) Confirm the displayed message, and click Align Print Head.  · Manual print head alignment. Open the printer driver setup window. Select Custom Settings on the Maintenance tab. The Custom Settings dialog box opens. Check the Align heads manually check box. Select OK when the prompt appears. Select Print Head Alignment on the Maintenance tab. The Start Print Head Alignment dialog box opens.  · Follow the steps below to perform a Manual Print Head Alignment (Windows): Note: After confirming that the cable is connected and the printer is powered on, perform the following. 1. Open the Printers folder. For Windows 7. Click the 'Start' button from the bottom left of the Windows screen, and then click on 'Devices and Printers'.

The size of paper may not be compatible with automatic duplex printing. The sizes of media suitable for auto duplex printing are A4, Letter, A5, and 5" x 7". Make sure that the size of the paper loaded in the printer is correct. Pressing the RESUME/CANCEL button will eject the paper and restart printing from the front. 3. Raise the print head lock lever. 4. Pull out the print head from its package, then remove the orange protective cap from it. Note: Do not touch the print head nozzles , electrical contacts, or ink supply ports. Doing so may cause printing problems. 5. Place the print head in the holder and lower the print head lock lever. 3. Open the Front Tray gently, and pull out the Front Tray Extension. 4. Open the printer driver setup window. 5. Adjust the print head position. (1) Click the Maintenance tab. (2) Click Print Head Alignment. (3) Confirm the displayed message, and click Align Print Head.

Aligning the Print Head · 1. Make sure that the printer is on. · 2. Press the Open Button to open the Paper Output Tray and extend the Output Tray. Extension. · 3. My problem originally, which is not cured, is that the red ink will hardly come through unless on manual set Maximum The printhead alignment still. Print head alignment. At print head replacement. To ensure accurate dot placement. - Printer buttons. - Computer. (automatic settings via the printer.